Our Instruments
Shortridge Air Capture Hood
Used For:
Measures air volume flowing through registers, diffusers, and grilles
Origin: USA
TSI Pro Hood Air Capture Hood
Used for:
Measures air volume flowing through registers, diffusers, and grilles
Origin: USA
Testo Rotating Vane Anemometer
Used For:
Measures air velocity and temperature, calculates flow rate, performs averaging, and can determine minimum and maximum readings.
Origin: German
Shortridge Multimeters
Used For:
Takes HVAC pressure measurements and can be used with Pitot probes to measure duct velocity
Origin: USA
Testo TH-Calc Thermo-Hygrometers
Used For:
Measures temperature and humidity
Origin: German
Comodronic Hydronic Manometers
Used For:
Measures water flow rates for both heating and cooling water systems
Origin: UK & USA
TSI Rotating Vane Anemometer
Used For:
Measures air velocity and temperature, calculates flow rate, performs averaging, and can determine minimum and maximum readings.
Origin: USA
Fluke Clamp meter
Used For:
Measures amperage and voltage
Origin: German
Amprobe Sound level meter
Used For:
Measures sound pressure level in dB
Checkline Tachometer
Used For:
Measures RPM for rotating equipment
From: USA
Alonr Hydronic Manometers
Used For:
Measures water flow rates for both heating and cooling water systems
Origin: USA
Dwyer Hydronic Differential Pressure Manometer
Used For:
Measures water flow rates for both heating and cooling water systems
Origin: USA
Pitot Tube
Used for:
Measures static pressure with duct traverse
Origin: USA
Balmac` Vibration Meter
Used For:
Measures overall vibration amplitude of motors, fans and pumps
Origin: USA
Integrating sound level meter
Used For:
Real time analysis of noise from any source
Origin: USA
Digital Photometer
Origin: UK
Airborne Particle Counter
Origin: USA
Thermal Aerosol Generator
Origin: UK
Positive Injection Pump (PIP)
Origin: UK
EBC Instrument Specs
| no. | Instrument Type | Measurement Range | Accuracy | Remarks |
|---|---|---|---|---|
|
1 |
Tachometer |
6 to 8,300RPM
8,300 to 25,000 RPM
25,000 to 99,999 |
± 1% of reading ± 2% of reading ± 0.006% of reading |
USA |
|
2 |
Temperature Measurement Air Immersion Contact |
-40 to 240 F |
± 1% of reading |
Germany |
|
3 |
Avometer |
0 to 600 VAC/DC 0 to 600 Amps |
VAC ± 1.5% AAC ± 2% VDC ± 1% |
Fluke |
|
4 |
Micro manometer (DP-Calc) |
0.05 to 50.00 in.w.g. |
± 2% of reading |
USA |
|
5 |
Rotating Vane |
50 to 3936 FPM |
± 1.5% of reading |
Germany |
|
6 |
Humidity Measurement |
10 to 90% RH |
2% RH |
Germany |
|
7 |
Direct Reading Hood |
25 to 2500 cfm |
± 3% of reading |
USA |
|
8 |
Pitot Tubes (2 required) |
18” minimum, Adequate length of intended use. |
N/A |
60” & 36” |
|
9 |
Hydronic Differential Pressure Measurement (Hydronic Manometer) |
0 to 200 ft.w.g. |
± 1% of reading |
UK |
|
10 |
Digital Photometer |
Up to 600 micrograms per liter |
1% of readings >0.01 to 100% |
UK |
|
11 |
Thermal Aerosol Generator |
500-70,000 cfm |
- |
UK |
|
12 |
Positive Injection Pump (PIP) |
≤ 58 /hr @ 50 mbar |
- |
UK |
|
13 |
Airborne Particle Counter |
0.3-25.0 μm |
50 % @ 0.3 μm ; 100% for particles > 0.45 μm (per ISO 21501 – 4) |
USA |